Bafang M560: The Better Fit for Modern eMTB Riding
The Bafang M560 is often the more practical choice for aggressive mountain eMTB riding. It delivers strong torque, but its weight and integration are still more suitable for a performance-oriented full suspension bike.
The M560 is a strong match for:
- Carbon eMTB builds
- Full suspension electric mountain bikes
- Enduro eMTB
- All-terrain electric mountain bikes
- Long-travel trail bikes
- Riders who need strong climbing support
- Riders who still care about handling and agility
A model like the CEF69 Bafang M560 eMTB shows why this motor direction matters. The CEF69 uses a TORAY T700/T800 carbon fiber frame, 180mm travel, 148x12 thru axle, M510/M560 motor options and an 835Wh battery system.
That combination is important. The motor is not working alone. The frame, suspension, battery, brakes and drivetrain all need to support the motor’s output.
Bafang M620: More Power, but Not Always Better for Trails
The Bafang M620 is a very powerful motor. It makes sense when the priority is heavy-duty torque rather than lightweight trail handling.
The M620 is better suited for:
- Fat tire e-bikes
- Cargo electric bikes
- Heavy riders
- Snow, sand or soft terrain
- Utility e-bikes
- Maximum torque builds
- Riders who prioritize power over agility
4LEAF uses the M620 direction on models such as the LOKI Carbon eMTB and fat LOKI Carbon eMTB, where a stronger motor can match the intended terrain and use case.
For technical singletrack, however, too much torque can become harder to manage. More power can also increase wear on the chain, cassette, rear hub and tires.
M560 vs M620 Comparison
| Feature | Bafang M560 | Bafang M620 |
|---|---|---|
| Best use | eMTB, eFat, aggressive trail | eCargo, eFat, heavy-duty eBike |
| Official torque direction | High torque | Higher torque |
| Rated power direction | Strong eMTB power | Heavy-duty high power |
| Weight direction | Lighter and more trail-friendly | Heavier and stronger |
| Riding feel | Better for controlled mountain riding | More raw power |
| Best 4LEAF match | CEF69, Rocksoul, LCE 971 | LOKI, fat LOKI |
| Best buyer | Rider who wants power plus handling | Rider who wants maximum torque |
Which One Should You Choose?
Choose Bafang M560 if you want:
- A real mountain eMTB feel
- Strong climbing support
- Better weight balance
- Carbon eMTB performance
- Enduro and all-terrain riding
- More controlled technical handling
Choose Bafang M620 if you want:
- Maximum torque
- Fat tire capability
- Heavy-duty riding
- Snow, sand or cargo use
- Less concern about weight
- Stronger low-speed pulling power
4LEAF Recommendation
For most riders looking for a serious full suspension mountain eMTB, the Bafang M560 is the better choice. It gives enough power for steep climbs and rough terrain while keeping the bike closer to a real mountain bike.
For riders who need heavy-duty power, fat tire traction or maximum torque, the Bafang M620 is still a strong option.
Explore related 4LEAF models:
- CEF69 Bafang M560 Carbon eMTB
- Rocksoul VPP eMTB Downhill
- LOKI Carbon eMTB with Bafang M620
- fat LOKI Carbon eMTB with Bafang M620
Final Verdict
If the question is “Which motor is stronger?”, the answer is M620.
If the question is “Which motor is better for a mountain eMTB?”, the answer is usually M560.
For most trail, enduro and carbon eMTB riders, the M560 offers the better balance of torque, control, weight and frame integration.